3.Push the ODD module into the ODD bay as shown. 4. Ensure that the ODD is flush with the chassis and the screw socket is aligned with the screw socket in the lower base.
NOTE: Do not insert a screw to secure the ODD. The ODD is secured after replacing the lower cover and all captive screws are tightened.
Replacing the Hard Disk Drive Module
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
1. Insert the HDD in to the carrier. | 2. Replace the four screws to secure the carrier. |
Chapter 3 | 111 |
