![](/images/new-backgrounds/1156534/156534131x1.webp)
Error Messages |
| Check or do the following in sequence: |
|
|
|
• | Power source (battery pack and power adapter.) See “Power | |
blank. |
| System Check” section on page 64. |
| • Make sure all connectors are connected tightly and correctly. | |
| • | Reinstall the DIMM. |
| • | Mainboard |
|
|
|
• | Power source (battery pack and power adapter.) See “Power | |
is blank. |
| System Check” section on page 64. |
| • Reconnect the LCD cable | |
| • | Hard disk drive |
| • | LCD panel |
| • | Mainboard |
|
|
|
• | Reconnect the LCD cable. | |
blank. POST is visible when using an | • | LCD panel |
external CRT. | • | Mainboard |
|
|
|
• | Make sure all connectors are connected tightly and correctly. | |
blinking cursor is during POST. | • | Mainboard |
|
|
|
Failure Fixed Disk | • | Reconnect the HDD connector. |
| • Select “Load Setup Defaults” in the BIOS Setup Utility’s Exit | |
|
| menu. |
| • | Hard disk drive |
| • | Mainboard |
|
|
|
No beep, | • | Power source (battery pack and power adapter). See “Power |
LCD is blank. |
| System Check” on page 64 |
| • Make sure all connectors are connected tightly and correctly. | |
| • | Reconnect the DIMM. |
| • | Mainboard |
|
|
|
No beep, | • | Power source (battery pack and power adapter). See “Power |
LCD is blank. |
| System Check” on page 64 |
| • Reconnect the LCD cable. | |
| • | Hard disk drive |
| • | LCD cable |
| • | LCD panel |
| • | Mainboard |
|
|
|
No beep, | • | Reconnect the LCD cable. |
LCD is blank. But you can see POST on an | • | LCD panel |
external CRT. | • | Mainboard |
| ||
|
|
|
No beep, | • | Make sure all connectors are connected tightly and correctly. |
blinking cursor shown on LCD during | • | Mainboard |
POST. |
|
|
No beep during POST but system runs | • | Speaker |
correctly. | • | Mainboard |
|
|
|
58 | Acer Aspire 4732Z/4332 Service Guide |