Acer ENTJ78, ENTJ77 manual To factory defaults by pressing the Alt+F10, Keys during system boot-up

CHAPTER 2: System utilities

Parameter	Description
D2D Recovery	Enables or disables the D2D Recovery
	function. This function allows the user to
	create a hidden partition on the hard drive
	to store the operation system. User can
	then use this partition to restore the system
	to factory defaults by pressing the Alt+F10
	keys during system boot-up.

Format/Options

Disabled

Enabled

SATA Mode	Select the SATA controller operating mode.	AHCI
	When set to AHCI (Advanced Host	IDE
	Controller Interface), the SATA controller
	enables its AHCI and RAID features when
	the computer boots up.
	When set to IDE, the SATA controller
	disables its AHCI and RAID functions when
	the computer boots up.
	Note: If you do not intend to use the AHCI
	or RAID features set this parameter to IDE
	to speed up the boot-up time.

Security

Use the Security menu option to set system passwords to protect your computer from unauthorized use.

			Phoenix SecureCore(tm) Setup					Utility
Information			Main	Security			Boot		Exit
									Item	Specific Help
Supervisor Password is:					Clear
User	Password		is:		Clear
HDD	Password		is:		Clear				Supervisor Password
									controls	access of	the
Set	Supervisor		Password		[	Enter	]		whole setup utility.
Set	User	Password			[Enter]				It can be used to		boot
Set	HDD	Password			[Enter]				up when	Password	on
									boot is	enabled.
Password		on Boot:			[Disabled]

		F1 Help	Select	Item	-/ +	Change	Values	F9	Setup	Defaults
		Es c Exit	Select	Menu	E n te r	Select	Sub-Menu	F10	Save	and Exit
.
	Parameter		Description							Option
	Supervisor		Displays the supervisor password status.							Clear
	Password Is									Set
	User Password Is		Displays the user password status.							Clear
										Set
	HDD Password Is		Displays the hard drive password status.							Clear
										Set

32