Acer ENTJ76, ENTJ77 manual Removing the bay cover, Complete the steps in Preparing the notebook on

www.packardbell.com

Removing the bay cover

To remove or replace components located on the lower bay, you need to remove the bay cover first.

Tools you need to complete this task:

Phillips #0 screwdriver Non-marring plastic scribe

To remove the bay cover:

1Complete the steps in “Preparing the notebook” on page 47.

2Turn the notebook over so the base is facing up.

3Loosen the bay cover screws (these screws cannot be removed).

4Insert a non-marring plastic scribe on the cover’s notch to release the cover from the computer, and then remove the cover.

49