CHAPTER 3: Replacing notebook components
58
Replacing the keyboard cover
Tools you need to complete this task:
Screws removed during this task:
•3 black M2.5×6 (keyboard cover)
To replace the keyboard cover:
1Complete the steps in “Preparing the notebook” on page47.
2Complete the steps in “Removing the battery” on page48.
3Remove the screws securing the keyboard cover.
4Turn the notebook over and open the LCD panel to its fully extended position.
5Insert a small flat-blade screwdriver or non-marring scribe between the LCD
hinge side and the keyboard cover, and carefully pry the cover up.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe