CHAPTER 3: Replacing notebook components
5Note the orientation of the power button board for later reference and then remove the board from the LCD assembly lid.
6Disconnect the power button cable from the board.
7Connect the power button cable to the new power button board.
8Position the new power button board on the LCD assembly lid making sure it is in the same orientation noted on step 5.
The board should fit snugly against the spring to ensure proper contact when pressing the power button.
9Place the LCD back on the LCD assembly lid.
10Return the hinge screws to their places.
11Reinstall the LCD front panel by performing steps
12Reinstall the LCD panel assembly by performing steps
13Turn the notebook over so the palm rest is facing up.
14Reinstall the keyboard and the keyboard cover by performing steps