www.packardbell.com
5Remove the speaker screws.
6Release the speaker cable from the palm rest, and then remove the speakers.
7Position the new speakers on the palm rest.
8Secure the speakers with the screws removed in step 5 and cover it with the tape that was detached in step 4.
9Secure the speaker cable on the palm rest latches
10Reinstall the palm rest by performing steps
11Reinstall the LCD panel assembly by performing steps
12Reinstall the keyboard and the keyboard cover by performing steps
13Return the optical screw drive in its place.
14Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the hard drive” procedure on page 54.
15If you have disconnected any wireless antennas, reconnect them now.
16Reinstall the bay cover.
73
