www.packardbell.com
5Secure the new multimedia board, with the connector facing up, on the keyboard cover.
6Insert the multimedia cable to its connector on the multimedia board, then close the clip to lock the cable in place.
7Insert the tabs on the front side of the keyboard cover into the slots located on the top corners of the palm rest assembly, then press down on the back part.
8Press down on the cover until it clicks in place.
The keyboard cover is correctly mounted when you can run you finger along the sides of the cover and find no gaps.
9Close the LCD panel and turn the notebook over so the base is facing up.
10Secure the keyboard cover with the screws removed in step 3 of the “Replacing the keyboard cover” procedure on page 58.
Caution
If the cover is not correctly installed, your notebook could be damaged when you try to close the LCD panel.
11Reinstall the battery.
61
