www.packardbell.com
83
Replacing the Bluetooth module
Tools you need to complete this task:
Screws removed during this task:
•1 black M2×5 (hard drive)
•1 black M2.5×6 (optical drive)
•3 black M2.5×6 (keyboard cover)
• 2 black M2.5×6 (LCD panel hinge - bottom)
• 2 black M2.5×6+Nylok (LCD panel hinge - top)
• 10 M2.5×6 black (palm rest - base side)
• 3 M2.5×6 black (palm rest - top side)
To replace the Bluetooth module:
1Complete the steps in “Preparing the notebook” on page47.
2Complete the steps in “Removing the battery” on page48.
3Complete the steps in “Removing the bay cover” on page49.
4If the notebook has a wireless card installed, unplug the antenna cables.
5Remove the hard drive screw, and then remove the hard drive from its
compartment.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe