29
Install the Server Board
To ensure proper grounding and support, it is recommended that you install screws in all the required mounting holes for your chassis. You may need to move cables out of the way to properly install your server board.
1While placing the board on the chassis standoffs, carefully position the board I/O connectors into the rear chassis I/O openings.
2Adjust board position to align mounting holes with standoffs.
3Using the screws that came with your chassis, mount the board to the chassis.
Note: If you install the server board into an Altos R700 chassis, you will not use all of the mounting holes. See your chassis documentation for more details.
