73
5In the System Phone Number box, enter the number for the phone line connected to the modem on the EMP.
6From the Access Mode list, choose the remote access mode:
•Always Active: the EMP is available at any time.
•Preboot: the EMP is available only when the server is powered down or is in the running POST during startup.
•Disabled: remote systems are not allowed to initiate connections.
7From the Restricted Mode list, choose either:
•Enabled: a remote system can initiate a connection, but cannot perform control operations such as power down, reset, or front panel NMI.
•Disabled: the remote system has full control of the server.
8From the Connection Mode list, choose either:
•Direct Connect: the serial 2 port on the server is connected by a serial cable to the remote system.
•Modem Connect: the serial 2 port on the server is connected to a modem.
9Click Save to save the changes.
10Click Close to return to the PEM window.
