67

Saving and Restoring the System Configuration

Using the SSU, you can save the following configuration information to a file:

Platform type, BIOS revision, and firmware revision

CMOS settings

Extended system configuration data (ESCD)

Settings for the emergency management port (EMP), platform event paging (PEP), and BMC LAN alerts

Data is saved from all sources. There is no way to choose only certain pieces of configuration data to save. You can also restore the information from a saved configuration file.

Note: BIOS passwords are stored in the file. Restoring a configuration can change passwords on a server. EMP and LAN passwords are not stored in the file.

Saving a Configuration

To save the system configuration:

1From the SSU Main window, choose Config Save/Restore. (Configuration Save/Restore is available only in Expert mode.)

2Click Save To File and specify a filename and location.

Restoring a Configuration

To restore the system configuration from a file:

1From the SSU Main window, choose Config Save/Restore. (Configuration Save/Restore is available only in Expert mode.)

2. Click Restore from File and specify a filename and location.

The CSR reads the platform type, BIOS revision, and firmware revision from the file and compares that information with the same information retrieved from the server. If the two do not match, an error message is displayed and the restore operation aborts. If they do match, the CSR restores the configuration data to the server. It prompts you to reboot the server for the new settings to take effect.

Page 77
Image 77
Acer R700 manual Saving and Restoring the System Configuration, Saving a Configuration, Restoring a Configuration