![](/images/new-backgrounds/1266654/266654137x1.webp)
Storage Device
Message Displayed | Description |
|
|
Primary Master Hard | The IDE/ATAPI device configured as Primary Master could not be properly |
Disk Error | initialized by the BIOS. This message is typically displayed when the BIOS is trying |
| to detect and configure IDE/ATAPI devices in POST. |
|
|
Primary Slave Hard | The IDE/ATAPI device configured as Primary Slave could not be properly initialized |
Disk Error | by the BIOS. This message is typically displayed when the BIOS is trying to detect |
| and configure IDE/ATAPI devices in POST. |
|
|
Secondary Master | The IDE/ATAPI device configured as Secondary Master could not be properly |
Hard Disk Error | initialized by the BIOS. This message is typically displayed when the BIOS is trying |
| to detect and configure IDE/ATAPI devices in POST. |
|
|
Secondary Slave | The IDE/ATAPI device configured as Secondary Slave could not be properly |
Hard Disk Error | initialized by the BIOS. This message is typically displayed when the BIOS is trying |
| to detect and configure IDE/ATAPI devices in POST. |
|
|
3rd Master Hard Disk | The IDE/ATAPI device configured as Master in the 3rd IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
3rd Slave Hard Disk | The IDE/ATAPI device configured as Slave in the 3rd IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
4th Master Hard Disk | The IDE/ATAPI device configured as Master in the 4th IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
4th Slave Hard Disk | The IDE/ATAPI device configured as Slave in the 4th IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
5th Master Hard Disk | The IDE/ATAPI device configured as Master in the 5th IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
5th Slave Hard Disk | The IDE/ATAPI device configured as Slave in the 5th IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
6th Master Hard Disk | The IDE/ATAPI device configured as Master in the 6th IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
6th Slave Hard Disk | The IDE/ATAPI device configured as Slave in the 6th IDE controller could not be |
Error | properly initialized by the BIOS. This message is typically displayed when the BIOS |
| is trying to detect and configure IDE/ATAPI devices in POST. |
|
|
Primary Master Drive | The IDE/ATAPI device configured as Primary Master failed an ATAPI compatibility |
- ATAPI Incompatible | test. This message is typically displayed when the BIOS is trying to detect and |
| configure IDE/ATAPI devices in POST. |
|
|
Primary Slave Drive - | The IDE/ATAPI device configured as Primary Slave failed an ATAPI compatibility |
ATAPI Incompatible | test. This message is typically displayed when the BIOS is trying to detect and |
| configure IDE/ATAPI devices in POST. |
|
|
Secondary Master | The IDE/ATAPI device configured as Secondary Master failed an ATAPI |
Drive - ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to |
Incompatible | detect and configure IDE/ATAPI devices in POST. |
|
|
Secondary Slave | The IDE/ATAPI device configured as Secondary Slave failed an ATAPI compatibility |
Drive - ATAPI | test. This message is typically displayed when the BIOS is trying to detect and |
Incompatible | configure IDE/ATAPI devices in POST. |
|
|
3rd Master Drive - | The IDE/ATAPI device configured as Master in the 3rd IDE controller failed an |
ATAPI Incompatible | ATAPI compatibility test. This message is typically displayed when the BIOS is |
| trying to detect and configure IDE/ATAPI devices in POST. |
|
|
Chapter 4 | 61 |