Actiontec USB/Ethernet DSL Modem User Manual

4.In the next screen, read the recommendations. To perform an advanced setup on the Modem, click Begin Advanced Setup.

5.The “Configuring the Advanced Settings” screen appears. To check all the set- tings, or if unsure of which settings to modify, select Next. To modify a spe- cific configuration, click on its name in the menu bar on the left.

Note: To save changes made in any of the Advanced Setup screens, click Save and Restart at the bottom of the gray menu on the left side of the screen.

WAN IP Address

Selecting WAN IP Address in the “Configuring the Advanced Settings” screen gen- erates the “WAN IP Address” screen. WAN IP Address allows manual set up of the IP address of the Modem. There are five ways to do this: Transparent Bridging, Obtain an IP Address through PPPoE, Obtain an IP Address Through PPPoA, Obtain an IP Address through DHCP, and Specify a Static IP Address.

34

Page 37
Image 37
Actiontec electronic GT701 user manual WAN IP Address