Manuals / Actiontec electronic / Computer Equipment / Network Card

Actiontec electronic GT701 user manual Encapsulation PPPoA only

Models: GT701

1 115

Download 115 pages 44.58 Kb

Page 40

Chapter 4 Using Advanced Setup

Encapsulation (PPPoA only)

Select one of the encapsulation options, based on information received from the ISP.

Obtain an IP Through DHCP

Select this option if the IP service is configured to use RFC 1483 Bridged or Routed (used for configurations without a static IP assigned by an ISP). In this mode, the Modem will query the ISP to receive the IP address and routing information, which will terminate at the Modem, as opposed to the IP address and routing information being bridged to terminate at the computer. This allows the use of the router capa- bilities for the Local Area Network (LAN).

Some ISPs need to authenticate their end users with a Host Name and/or Domain Name. If this is the case, check with the ISP for a host name and domain name and enter them in the appropriate text boxes in the “Broadband Connection via DHCP” screen. If the ISP does not require these settings, leave the text boxes blank.

☞Note: Contact the ISP if unsure of the proper configuration.

37

Image 40

Actiontec electronic GT701 user manual Encapsulation PPPoA only

Contents

DSL Modem Table of Contents Setting Up Static IP on the Computer SpecificationsGlossary Firewall Security Level Services Table Non-Windows System SetupPackage Contents Introduction1Features Minimum System RequirementsGetting to Know the Modem Power Light DSL LightInternet Light Ethernet LightPhone Port Phone port is used to connect the Modem to a phone jackUSB Port Ethernet PortOn/Off Switch Reset ButtonPower Port Power port is used to connect the Power cord to the ModemConnecting a Computer to the Modem Setting Up ModemConnecting Via Ethernet Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Installing Phone Filters Remove the phone filters from the clear bag. Click Next Setting Up the Modem USB Click NextNext, go to Setting Up the DSL Connection on the next Setting Up the DSL Connection Setting Up the Modem Installation Buddy checks the configuration of the Modem Modem is successfully configured and ready for usePerforming a Basic Setup Basic SetupPage Performing a Basic Setup Changing the Admin User Name and Password Click Save and Restart at the bottom of the screenAccessing Advanced Setup Using Advanced SetupTo access the Advanced Settings configuration screens WAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Specify a Static IP Address LAN IP Address Dhcp Server Ending IP Address Beginning IP AddressDNS Dynamic or Static Services Blocking DNS ServerWebsite Blocking Remote Management Port ForwardingUsing Advanced Setup DMZ Hosting FirewallDynamic Routing NAT Network Address TranslationStatic Routing Viewing Modem’s Settings StatusPage Routing Table WAN StatusLAN Status Active User ListUsing Utilities Web Activity LogDSL Settings Restore Default SettingsUpgrade Firmware This page left intentionally blank Troubleshooting TroubleshootingCannot Use the Internet Physical ConnectionsFrequently Asked Questions Connection to the InternetWhich protocols does the Modem support? Which connection speeds does the Modem support?Is the Modem flash-upgradeable? How do I do it? What is the valid IP range I can use for my home network?How do I find out which IP address my computer is using? Will my Xbox work with the Modem?Yes, if the application is designed to run over a network What is the default username for the Modem? What is NAT and how does it protect my network?How many computers can be connected through the Modem? Does the Modem function as a firewall?This page left intentionally blank Reference Locating Computer InformationLocating Windows Operating System Files Appendix a Reference Click Search Setting Up Static IP On the Computer Windows 98 SEPage 192.168.0.2 Windows Me Enter the following address in the Subnet mask text boxAppendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Comparing DSL Service with a Dial-Up Modem Computer SecurityComputer Security Modem SecurityWeb Browsers Electronic Security This page left intentionally blank Specifications D GeneralPower, DSL, Internet, Ethernet, USB LED IndicatorsEnvironmental Access Point GlossaryPage Ssid This page left intentionally blank Firewall Security Level Services Table High Security LevelMedium Security Level Low Security LevelService Acronym Definitions Basic Security LevelReal audio/video Icmp323 120Non-Windows G System Setup ClassicPage Appendix G Non-Windows Setup Page Installation Buddy Settings 100 Modifications Regulatory Compliance NoticesClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty 103104 Limited Warranty 106 Index 108 Index 110 111 112