Frequently Asked Questions | Actiontec electronic GT701 instruction

Actiontec USB/Ethernet DSL Modem User Manual

Connection to the Internet

To verify the Modem’s connection to the Internet, open a Web browser. In the “Address” text box, type 192.168.0.1 and click Go. The Modem’s Web Configurator Main Menu appears. Select Status, and once the “Status” screen appears, verify that “Connected” is displayed in the “WAN” section of the screen. If not, power cycle the Modem by unplugging and then replugging the Power cord. After power cycling the Modem, check the connection status again. If still disconnected, go to the Main Menu, select Setup, and go through a Basic Setup procedure, making sure to enter all correct selections and/or entries for the con- nection. After saving all settings and restarting the Modem, check the connec- tion status again. If still disconnected, unplug the Modem’s Power cord and leave it unplugged for at least 10 minutes. Replug the Power cord, restart the Modem, and check the connection again.

Frequently Asked Questions

This section contains a list of questions concerning the Modem, and answers to the questions.

General

I have run out of Ethernet ports on my Modem. How do I add more computers?

Plugging in an Ethernet hub or switch can expand the number of ports on the Modem. Connect a standard Ethernet cable from the “Uplink” port of the new hub or switch to the Ethernet port on the Modem, then connect additional computers to the Ethernet hub or switch.

Which protocols does the Modem support?

The internal LAN connections support multiple protocols (e.g. TCP/IP, NetBEUI, IPX/SPX, and AppleTalk). The External WAN connection supports only TCP/IP.

Which connection speeds does the Modem support?

The LAN connections on the Modem support 10/100 Mbps. The WAN connec- tion supports 8 Mbps because of the physical restrictions placed on broadband connections.

58

Image 61

Actiontec electronic GT701 Frequently Asked Questions, Connection to the Internet, Which protocols does the Modem support?

Contents

DSL Modem Table of Contents Specifications Setting Up Static IP on the ComputerGlossary Firewall Security Level Services Table Non-Windows System Setup Introduction1 Package Contents Minimum System Requirements Features Getting to Know the Modem DSL Light Power LightInternet Light Ethernet Light Phone port is used to connect the Modem to a phone jack Phone PortUSB Port Ethernet Port Reset Button On/Off SwitchPower Port Power port is used to connect the Power cord to the Modem Connecting a Computer to the Modem Setting Up ModemConnecting Via Ethernet Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Installing Phone Filters Remove the phone filters from the clear bag. Click Next Setting Up the Modem Click Next USB Next, go to Setting Up the DSL Connection on the next Setting Up the DSL Connection Setting Up the Modem Modem is successfully configured and ready for use Installation Buddy checks the configuration of the Modem Basic Setup Performing a Basic SetupPage Performing a Basic Setup Click Save and Restart at the bottom of the screen Changing the Admin User Name and Password Accessing Advanced Setup Using Advanced SetupTo access the Advanced Settings configuration screens WAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Specify a Static IP Address LAN IP Address Dhcp Server Ending IP Address Beginning IP AddressDNS Dynamic or Static DNS Server Services Blocking Website Blocking Port Forwarding Remote Management Using Advanced Setup Firewall DMZ Hosting NAT Network Address Translation Dynamic Routing Static Routing Status Viewing Modem’s SettingsPage WAN Status Routing Table Active User List LAN Status Web Activity Log Using Utilities Restore Default Settings DSL Settings Upgrade Firmware This page left intentionally blank Troubleshooting TroubleshootingCannot Use the Internet Physical Connections Connection to the Internet Frequently Asked QuestionsWhich protocols does the Modem support? Which connection speeds does the Modem support? What is the valid IP range I can use for my home network? Is the Modem flash-upgradeable? How do I do it?How do I find out which IP address my computer is using? Will my Xbox work with the Modem? Yes, if the application is designed to run over a network What is NAT and how does it protect my network? What is the default username for the Modem?How many computers can be connected through the Modem? Does the Modem function as a firewall? This page left intentionally blank Locating Computer Information Reference Locating Windows Operating System Files Appendix a Reference Click Search Windows 98 SE Setting Up Static IP On the ComputerPage 192.168.0.2 Enter the following address in the Subnet mask text box Windows Me Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Computer Security Comparing DSL Service with a Dial-Up Modem Computer Security Modem SecurityWeb Browsers Electronic Security This page left intentionally blank General Specifications D Power, DSL, Internet, Ethernet, USB LED IndicatorsEnvironmental Glossary Access PointPage Ssid This page left intentionally blank High Security Level Firewall Security Level Services Table Low Security Level Medium Security Level Basic Security Level Service Acronym Definitions Icmp Real audio/video323 120 Classic Non-Windows G System SetupPage Appendix G Non-Windows Setup Page Installation Buddy Settings 100 Modifications Regulatory Compliance NoticesClass B Equipment All other names are the property of their respective owners Miscellaneous Legal Notices 103 Limited Warranty 104 Limited Warranty 106 Index 108 Index 110 111 112