Minimum System Requirements, Features | Actiontec electronic GT701

Actiontec USB/Ethernet DSL Modem User Manual

Minimum System Requirements

sActive DSL service

sComputer with a 10/100 Mbps Ethernet connection, or USB connection

☞Note: USB LAN port is not supported with Microsoft Windows 95, Windows NT 4.0, and Mac OS.

sMicrosoft Windows 98 Second Edition (SE), Windows Millennium Edition (Me), Windows NT 4.0, Windows 2000, Windows XP, Mac OS 7.1 and above

sInternet Explorer 4.0 or higher (5.x recommended) or Netscape Navigator 4.0 or higher (4.7 recommended)

sTCP/IP network protocol installed on each computer

Features

sPlug-and-Play installation support for systems with Windows operating systems (98, 98SE, Me, 2000, and XP)

sADSL WAN port (RJ-11)

sCompliant with full-rate ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) and G.992.2 (G.lite) standard

sAuto-handshake for different ADSL flavors

sUSB 1.1 device specification compliance

s11 Mbps USB data rate (full speed)

sBridged Ethernet over ATM, PPP over ATM, PPP over Ethernet

sPrecise ATM traffic shaping

sIP packet routing and transparent bridge

sRouting protocol supports RIP-1, RIP-2, static routing

sBuilt-in NAT, DHCP server

sDNS relay support

sPAP/CHAP authentication, administrative passwords through Telnet

2

Image 5

Actiontec electronic GT701 user manual Minimum System Requirements, Features

Contents

DSL Modem Table of Contents Specifications Setting Up Static IP on the ComputerGlossary Firewall Security Level Services Table Non-Windows System Setup Introduction1 Package Contents Minimum System Requirements Features Getting to Know the Modem DSL Light Power LightInternet Light Ethernet Light Phone port is used to connect the Modem to a phone jack Phone PortUSB Port Ethernet Port Reset Button On/Off SwitchPower Port Power port is used to connect the Power cord to the Modem Connecting Via Ethernet Setting Up ModemConnecting a Computer to the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Installing Phone Filters Remove the phone filters from the clear bag. Click Next Setting Up the Modem Click Next USB Next, go to Setting Up the DSL Connection on the next Setting Up the DSL Connection Setting Up the Modem Modem is successfully configured and ready for use Installation Buddy checks the configuration of the Modem Basic Setup Performing a Basic SetupPage Performing a Basic Setup Click Save and Restart at the bottom of the screen Changing the Admin User Name and Password To access the Advanced Settings configuration screens Using Advanced SetupAccessing Advanced Setup WAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Specify a Static IP Address LAN IP Address Dhcp Server DNS Dynamic or Static Beginning IP AddressEnding IP Address DNS Server Services Blocking Website Blocking Port Forwarding Remote Management Using Advanced Setup Firewall DMZ Hosting NAT Network Address Translation Dynamic Routing Static Routing Status Viewing Modem’s SettingsPage WAN Status Routing Table Active User List LAN Status Web Activity Log Using Utilities Restore Default Settings DSL Settings Upgrade Firmware This page left intentionally blank Troubleshooting TroubleshootingCannot Use the Internet Physical Connections Connection to the Internet Frequently Asked QuestionsWhich protocols does the Modem support? Which connection speeds does the Modem support? What is the valid IP range I can use for my home network? Is the Modem flash-upgradeable? How do I do it?How do I find out which IP address my computer is using? Will my Xbox work with the Modem? Yes, if the application is designed to run over a network What is NAT and how does it protect my network? What is the default username for the Modem?How many computers can be connected through the Modem? Does the Modem function as a firewall? This page left intentionally blank Locating Computer Information Reference Locating Windows Operating System Files Appendix a Reference Click Search Windows 98 SE Setting Up Static IP On the ComputerPage 192.168.0.2 Enter the following address in the Subnet mask text box Windows Me Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Computer Security Comparing DSL Service with a Dial-Up Modem Web Browsers Modem SecurityComputer Security Electronic Security This page left intentionally blank General Specifications D Environmental LED IndicatorsPower, DSL, Internet, Ethernet, USB Glossary Access PointPage Ssid This page left intentionally blank High Security Level Firewall Security Level Services Table Low Security Level Medium Security Level Basic Security Level Service Acronym Definitions Icmp Real audio/video323 120 Classic Non-Windows G System SetupPage Appendix G Non-Windows Setup Page Installation Buddy Settings 100 Class B Equipment Regulatory Compliance NoticesModifications All other names are the property of their respective owners Miscellaneous Legal Notices 103 Limited Warranty 104 Limited Warranty 106 Index 108 Index 110 111 112