Specify a Static IP Address | Actiontec electronic GT701 instruction

Actiontec USB/Ethernet DSL Modem User Manual

Specify a Static IP Address

Select this option if the ISP service is configured to use RFC 1483 Bridged or Routed using a static IP Address. Enter the IP Address, Subnet Mask, and Default Modem Address provided by the ISP in the “Broadband Connection via Static IP Address” screen, which causes the IP address and routing information to termi- nate at the Modem, as opposed to the IP address and routing information being bridged to terminate at the computer. This allows the use of the router capabilities for the Local Area Network (LAN).

☞Note: Contact the ISP if unsure of the proper configuration.

Encapsulation

If the Modem is configured to obtain an IP address through DHCP or to specify a static IP address, select the appropriate encapsulation option used by the ISP (RFC 1483 Bridged or RFC 1483 Routed).

☞Note: Contact the ISP if unsure of the proper configuration.

Unnumbered Mode/VIP Mode

If a block of public static IP addresses was purchased from the ISP, select Unnumbered Mode by clicking in the appropriate check box. Then, enter the IP Address and Subnet Mask in the “Modem Address” and “Unnumbered Subnet Mask” text boxes below the “Unnumbered IP Address.” Click Next, then click Save and Restart to make all changes permanent.

38

Image 41

Actiontec electronic GT701 user manual Specify a Static IP Address

Contents

DSL Modem Table of Contents Specifications Setting Up Static IP on the ComputerGlossary Firewall Security Level Services Table Non-Windows System Setup Introduction1 Package Contents Minimum System Requirements Features Getting to Know the Modem DSL Light Power LightInternet Light Ethernet Light Phone port is used to connect the Modem to a phone jack Phone PortUSB Port Ethernet Port Reset Button On/Off SwitchPower Port Power port is used to connect the Power cord to the Modem Connecting Via Ethernet Setting Up ModemConnecting a Computer to the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Installing Phone Filters Remove the phone filters from the clear bag. Click Next Setting Up the Modem Click Next USB Next, go to Setting Up the DSL Connection on the next Setting Up the DSL Connection Setting Up the Modem Modem is successfully configured and ready for use Installation Buddy checks the configuration of the Modem Basic Setup Performing a Basic SetupPage Performing a Basic Setup Click Save and Restart at the bottom of the screen Changing the Admin User Name and Password To access the Advanced Settings configuration screens Using Advanced SetupAccessing Advanced Setup WAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Specify a Static IP Address LAN IP Address Dhcp Server DNS Dynamic or Static Beginning IP AddressEnding IP Address DNS Server Services Blocking Website Blocking Port Forwarding Remote Management Using Advanced Setup Firewall DMZ Hosting NAT Network Address Translation Dynamic Routing Static Routing Status Viewing Modem’s SettingsPage WAN Status Routing Table Active User List LAN Status Web Activity Log Using Utilities Restore Default Settings DSL Settings Upgrade Firmware This page left intentionally blank Troubleshooting TroubleshootingCannot Use the Internet Physical Connections Connection to the Internet Frequently Asked QuestionsWhich protocols does the Modem support? Which connection speeds does the Modem support? What is the valid IP range I can use for my home network? Is the Modem flash-upgradeable? How do I do it?How do I find out which IP address my computer is using? Will my Xbox work with the Modem? Yes, if the application is designed to run over a network What is NAT and how does it protect my network? What is the default username for the Modem?How many computers can be connected through the Modem? Does the Modem function as a firewall? This page left intentionally blank Locating Computer Information Reference Locating Windows Operating System Files Appendix a Reference Click Search Windows 98 SE Setting Up Static IP On the ComputerPage 192.168.0.2 Enter the following address in the Subnet mask text box Windows Me Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Computer Security Comparing DSL Service with a Dial-Up Modem Web Browsers Modem SecurityComputer Security Electronic Security This page left intentionally blank General Specifications D Environmental LED IndicatorsPower, DSL, Internet, Ethernet, USB Glossary Access PointPage Ssid This page left intentionally blank High Security Level Firewall Security Level Services Table Low Security Level Medium Security Level Basic Security Level Service Acronym Definitions Icmp Real audio/video323 120 Classic Non-Windows G System SetupPage Appendix G Non-Windows Setup Page Installation Buddy Settings 100 Class B Equipment Regulatory Compliance NoticesModifications All other names are the property of their respective owners Miscellaneous Legal Notices 103 Limited Warranty 104 Limited Warranty 106 Index 108 Index 110 111 112