• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 11
Ford Historic (OBD I) Diagnostics
6
✓The following actions do not apply to MECS vehicles.
❒For a 7.3L Diesel, press the throttle until test is done.
❒If applicable, set octane switch to premium.
✓The Scan Tool prompt the user to:
❒Work steering wheel
❒Pump brake pedal & cycle overdrive (OD) cancel switch.
(Cycle overdrive only if a pushbutton is available.)
✓Observe screen for the prompt to perform the next action.
❒Quickly press and release the throttle. One time only!
4. When test completed.
•Turn ignition key off.
• Press ENTER to continue.
✓If no problems exist, Code 11 or
111 will be displayed.
5. View and write down
DTCs.
•Use
UP
or
DOWN
arrow
key to scroll to next DTC.
✓ENG indicates that DTC is from the
engine or powertrain control
module.
6. Return to Diagnostic Codes Menu.
• Press BACK.
Turn ignition
key off.
Press ENTER to cont.
Test Completed
1 of 1
ENG
Systen Pass Code.
No faults detected
during KOER test.
KOER
111
1 of 3
ENG
PFE/DPFE EGR sensor
below min. voltage.
KOER
326