Actron CP9185 manual Select Trigger Method, Recording. Trigger on Codes will

GM Historic (OBD I) Diagnostics

!! WARNING

Never operate the tool while driving. Have another person assist with the operation of the Scan Tool.

✓This function can be performed with KOEO or KOER.

2.Confirm selection.

•Press LEFT or RIGHT to move the brackets to the desired response.

• Press	ENTER.
✓ If a recording currently exists in
memory, a message to Erase Old
Recording is displayed. The Scan		Record Data
		Previous recording
Tool stores only one recording at a
		in memory. Do you
time, so be sure to review it before		want to erase it and
erasing it.		make a new one?

<Yes>

No

Multiple Group Vehicles
✓ Some vehicles display a Select Group screen for recording data.		5
In these cases, only one group of data can be recorded at a time.
Recording another group of data overwrites the present one.
3. Select Trigger Method.
•Use UP or DOWN arrow	Select Trig Method
key until desired trigger	￿ Manual Trigger
method is highlighted.	Trigger on Codes

•Manual Trigger begins recording when the ENTER key is pressed.

•Trigger on Codes begins recording when a diagnostic trouble code (DTC) is stored in the PCM.

•Select a method and press	ENTER.
✓ If Manual Trigger is selected,
press ENTER to begin
recording. Trigger on Codes will	Record Data
not show this screen.	Ready to record
	Press ENTER
	to start recording.
	Press BACK
	to exit.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 5