• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 19
Using The Scan Tool
3
✓Scan Tool Review Data function has different types of data to review
depending on vehicle selected.
Refer to appropriate section of this manual for what functions have data
for review.
2.Follow prompts and instructions provided by Scan Tool.
✓The Review Data menu shows a
checkmark next to the item(s) that
has data.
✓If data does not exist for function
selected to review, a message
informs the user to run a function
first.
✓Only 1 function, Playback, needs detailed instructions.
Playback
The Playback function is used to playback a recording.
✓This function is very similar to View Data. The only difference is that
View Data is real time viewing of PIDs, while Playback is a viewing
of previously recorded PIDs.
From the Review Data menu:
1.Select Playback.
•Use
UP
or
DOWN
arrow
key until Playback is
highlighted.
✓Scan Tool displays a NO
RECORDING PRESENT
message if recording does not
exist.
I/M Readiness
Read Codes
Pending Codes
Fre eze Data
O2 Monitor Test
Diag Mon Test
Playback
Review Data
Read Codes
Fre eze Frame
State OBD Check
O2 Monitor Test
Diag Mon Tests
Playback
Vehicle Info
Modules Present
Review Data
Playback