Part II
Step 2 |
|
|
|
| B |
Upper Limit (blinking) |
|
|
| ||
|
|
| LAP | ||
- Press | STR/LAP Button | B | or STP/RESET |
|
|
Button | C to adjust the value. |
|
| C | |
- Press MODE/NXT Button | D | to proceed to the | D | ||
next item. |
|
|
|
| |
Step 3 |
|
|
|
| B |
Lower Limit (blinking) |
|
|
| ||
|
|
| LAP | ||
- Press | STR/LAP Button | B | or STP/RESET |
|
|
Button | C to adjust the value. |
|
|
| |
- Press MODE/NXT Button | D | to exit and return | D | C | |
to the Heart Rate Mode. |
|
|
|
| |
Note: Press SET Button A | to toggle between the heart rate limit in BPM or | ||||
Percentage of your Maximum Heart Rate in the Setting Mode.
Setting the Target Zone Alarm
If you set the Target Zone Alarm to ON, the watch will beep when you are above or below the selected Target Zone. From the Select TZ Mode, press & hold STP/RESET Button C to set the Target Zone Alarm to ON or OFF. ON is indicated by the "
" icon.
From the Select TZ Mode, press MODE/NXT Button D four times to return to the Analog Time Display.
44
