1-7
Introduction
Overview of the Installation Process
The following steps provide an overview of the process of
installing and configuring the ASA-7211 adapter:
1Verify that your computer meets the requirements described in
System Requirements on page 1-4.
2Gain familiarity with the contents of the AdapteciSCSI
installation CD.
3Install the Adaptec iSCSI adapter as described in Chapter 2.
4Install the appropriate driver for your operating system as
described in Chapter3.
5Connect a Ethernet cable with the appropriate connector type
(either copper or fibre) and establish network connectivity
between your adapter and your targets.
6Install the iConfig utility and use it to configure your network,
as described in Chapter 4, Configuring Your iSCSI System.
ASA-7211 IG.book Page 7 Tuesday, February 11, 2003 10:04 AM