4-1
4
Configuring Your iSCSI System
In this Chapter
Now that you have installed your Adaptec iSCSI adapter and
driver, you need to establish Ethernet connectivity between your
adapter and your targets. Then, run iConfig and use it to configure
your iSCSI system.
iConfig has an easy-to-use Express Setup that prompts you for the
information your system needs to configure it for the first time.
Once your system is setup, you can use iConfig to view, change, or
upgrade your configuration. For example, you can monitor your
connections, display MIB statistics and event logs, and add and
delete targets.
Running iConfig on Windows 4-2
Running iConfig on Red Hat Linux 4-3
Using Express Setup to Configure Your iSCSI Adapter 4-4
Changing Your iConfig Password 4-5
Configuration Tasks 4-5
ASA-7211 IG.book Page 1 Tuesday, February 11, 2003 10:04 AM