4-5

Configuring Your iSCSI System

Changing Your iConfig Password

The default user ID is admin. The default password is adaptec.

To change the default password:

1From the Main Menu, select User Logout and Login Password.

For details, see the Main Menu illustration on page 4-4.

2Select User Password Change.

3To complete the change, follow the iConfig instructions.

Configuration Tasks

The following table summarizes the configuration tasks you can

perform using iConfig. The menu options all appear in the Main

Menu illustration on page 4-4.

For additional information, refer to the iConfig Utility User’s Guide.

To perform this task... Use this Menu Option...
➣View controller and target info ➣1. Display Properties
➣View and set controller, Ethernet,
SLP, and ISNS properties
➣View and set login parameters
➣2. Setup Properties
➣View, add, edit, delete, and rescan
targets
➣3. Device and Targets
➣View, add, and delete routing,
DNS, ARP, and Host table entries.
➣4. Routing, DNS, and ARP
➣View port transmission statistics,
event messages, initiator login,
iSCSI session statistics and iSCSI
node portal info
➣5. Statistics, MIB, and Event Log
➣Erase or save ROM settings
➣Upgrade firmware
➣6. Firmware and ROM
➣Logout
➣Change your password
➣7. User Logout and Login
Password
➣Save settings ➣8. Immediate Save Settings
ASA-7211 IG.book Page 5 Tuesday, February 11, 2003 10:04 AM