Appendix B: Using the ARC Utility ●57
4Press Enter.
5Read the warning message and ensure that you have selected the correct disk drives to
configure. Type
Y
to continue.

ATAPI Support

The following devices are supported:
●The 1220SA supports detection of SATA ATAPI TAPE Drive and CDROM.
●The 1220SA supports booting from the ELTORITO bootable CD/DVD media.
If a bootable CD/DVD media is detected, that bootable media gets precedence in the
booting order.
Using SATASelect
The SATASelect utility allows you to change the BIOS and HostRAID controller and device
settings without opening the computer cabinet.
For information on the SATASelect options, see SATASelect Options on page 58. To access
SATASelect:
1Restart the computer, then press Ctrl+A when prompted to access the ARC utility.
2If multiple HostRAID controllers are installed, select the HostRAID controller you want to
configure, then press Enter.
3From the ARC menu, sele ct SATASelect Utility.
4To select a menu option, browse with the arrow keys to the option, then press Enter. In
some cases, selecting an option displays another menu. You can return to the previous
menu at any time by pressing Esc.
5To restore the original SATAlSelect default values, press F6 from within the SATA Driver
and Controller Configuration screens.
6To e xi t S ATASelec t, press Esc until a message prompts you to exit (if you changed any
settings, you are prompted to save the changes before you exit).
7At the prompt, s elect Ye s to exit, then press any key to restart the computer. Any changes
you made in SATAlSelect take effect after the computer restarts.