Requirements For Your System

REQUIREMENTS FOR YOUR SYSTEM

You need the following hardware and software to complete the installation and configuration of the Megabit Modem 400F:

•PC with an Ethernet Network Interface Card (NIC)

•TCP/IP network protocol stack (see your documentation for your operating system)

•Web browser installed such as Netscape® or Internet Explorer® Version 4.0 or higher

•Ethernet hub (optional)

REQUIREMENTS FOR THE INSTALLATION SITE

To install the Megabit Modem 400F:

•select a location to install the modems as described in the section “Location for Modem Installation” on this page

•identify requirements to connect phones, if you get phone service, as described in the section “Phone Service” on page 9

Location for Modem Installation

You can install the modem either:

•placed on a flat surface (shown on page 7)

•mounted on a wall (shown on page 8)

Your facility must have the following minimum site requirements to install each modem:

•power outlet

•RJ-11 wall jack that has DMT ADSL service available

6

Megabit Modem 400F User Manual