Saving the Configuration

SAVING THE CONFIGURATION

As you make changes to the modem configuration, click the Submit button on the Web page to accept changes and write the changes to RAM. Some configuration changes are not permanent, however, until you write them to Non-Volatile RAM (NVRAM) and reset the modem. You must reset the modem to effect these changes:

•LAN IP address

•LAN network mask

•when DHCP is enabled (see Page 41 Bridge/Router system mode):

–primary DNS IP address

–secondary DNS IP address

•RIP version (see Page 39 for selecting version and direction for RIP)

See the following sections to:

•save configuration changes to NVRAM on Page 25

•reset the modem to activate the configuration on Page 28

•reset the modem to restore the factory default values on Page 26

24

Megabit Modem 400F User Manual