Selecting a Configuration Model
SELECTING A CONFIGURATION MODEL
There are many configuration options for the Megabit Modem 400F from which you can select. The following is a recommended model for configuring the Megabit Modem 400F:
1Complete the WAN configuration on page 38 for Bridge/Router RFC 1483.
2On the EasySession page:
Select the sessions you want active then click Enable. The modem will set up the session with the service provider. The Up radio button next to the session(s) will indicate that the session was successfully set up.
3Set up the LAN side configuration, including DHCP on page 41 for Bridge/Router RFC 1483. The modem will serve IP addresses to devices on the LAN (routing mode only).
36 | Megabit Modem 400F User Manual |