Chapter 6: Configuring Sessions

Configuring the LAN for RFC 1483 Bridge/Routing

1Click EasySession on the Main Menu to access the EasySession page.

When you enable Spanning Tree, it is enabled system-wide. If you select Bridging mode, Spanning Tree is active. If you choose Routing, it simply does not recognize Spanning Tree. Spanning Tree protocol eliminates loops in a LAN topology and is used with RFC 1483 Bridging/Routing only. See “Spanning Tree Protocol” on page 64 for more information.

2At the top of the EasySession page, click Spanning Tree Enable if you implement Spanning Tree in Bridging mode (page 84).

3Click Edit to access the LAN configuration page.

Megabit Modem 400F User Manual

41