Configuring RFC 1483 Bridging/Routing Sessions
Configuring the WAN for RFC 1483 Bridge/Routing
You will configure the WAN parameters for RFC 1483 sessions between the Megabit Modem 400F and the service provider.
1Do the following to configure the WAN:
Select a name for the service that is descriptive. The service name is an identifier you use for the session and is not used for anything else. When you enter a service name, it displays as the Port name for that session on the EasySession page.
‹Enter a descriptive name for the Service Name. The name you enter here also displays in the Port field on the EasySession page (the fields are linked). Use a maximum of 19 characters for the service name, with no spaces allowed or double quotes in the name.
ŒEnter the ATM VPI and ATM VCI values provided by the service provider. The addresses are the virtual path identifier and virtual channel identifier for the session connection (ATM) between the modem and the service provider. (See page 85 for the VPI and VCI values you recorded from the service provider. Also, see “Mapping an ATM Session” on page 62 for information on VPI and VCI values.)
.
‹
Œ
•
Ž
•
•
‘
38 | Megabit Modem 400F User Manual |