C. ELECTRICAL SERVICE SPECIFICATIONS
1.Gas Models
ADG-464 (GAS)
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)*
IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
NOTES: A. Fuse ratings are
B.Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.
C.Circuit breakers for 3Ø dryers must be
SERVICE | PHASE | WIRE | APPROX. | FUSING | CIRCUIT | ||
AMP DRAW |
| ||||||
Dual Element | |||||||
VOLTAGE | SERVICE | BREAKER | |||||
|
|
| 60 Hz | 50 Hz | Time Delay |
| |
208 | 3ø | 3/4 | 107 | 150 | 150 | ||
240 | 3ø | 3/4 | 101 | 98 | 150 | 150 | |
3ø | 3/4 | 53 | 80 | 90 | |||
416 | 3ø | 3/4 | 51 | 60 | 90 | ||
460/480 | 3ø | 3/4 | 51 | 60 | 90 | ||
DEDICATED SPRINKLER SERVICE**
Dryer Nameplate | 1ø |
2
3.5
5
*Contact factory for information not listed.
**Minimum wire size is #16 AWG Stranded Type Wire...for individual lengths less than 100 feet.
2.Steam Models
ADS-464 (STEAM)
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)*
IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
NOTES: A. Fuse ratings are
B.Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.
C.Circuit breakers for 3Ø dryers must be
SERVICE | PHASE | WIRE | APPROX. | FUSING | CIRCUIT | ||
AMP DRAW |
| ||||||
Dual Element | |||||||
VOLTAGE | SERVICE | BREAKER | |||||
|
|
| 60 Hz | 50 Hz | Time Delay |
| |
200 | 3ø | 3 | 117 | 150 | 150 | ||
208 | 3ø | 3/4 | 102 | 150 | 150 | ||
240 | 3ø | 3/4 | 96 | 94 | 125 | 150 | |
3ø | 3/4 | 51 | 60 | 90 | |||
416 | 3ø | 3/4 | 51 | 60 | 90 | ||
460/480 | 3ø | 3/4 | 49 | 60 | 90 | ||
DEDICATED SPRINKLER SERVICE**
Dryer Nameplate | 1ø |
2
3.5
5
*Contact factory for information not listed.
**Minimum wire size is #16 AWG Stranded Type Wire...for individual lengths less than 100 feet.
NOTE: ADC reserves the right to make changes in specifications at any time, without notice or obligation.
11
