Setting Up System Options | |
|
|
NAVIGATING THROUGH CRAFT INTERFACE MENUS
Many of the operations that follow require the use of the craft interface.
To select a menu from the craft interface, do one of the following:
•Press the number of the menu.
• | Use the ← | → arrow keys to select the menu and press ENTER . |
Table 4 summarizes the navigational keys, which are also listed in the | ||
| Table 4. Navigational Keys for the Craft Interface Screens During Telnet Sessions | |
|
|
|
Key (a) |
| Function |
|
| |
SPACEBAR | Cycles through selections. | |
ENTER |
| Activates the current setting or choice, or display a menu. |
ESC |
| Returns to the previous menu. |
↑ |
| Selects the line or item above the current one. |
↓ |
| Selects the line or item below the current one. |
→ |
| Selects the next page or item to the right of the current one. |
← |
| Selects the previous page or item to the left of the current one or returns to the previous menu. |
Menu number | Selects the menu or item. | |
CTRL | + T | Returns to Main menu. |
CTRL | + P | Returns to previous menu. |
CTRL + D | Terminates the session (logout). | |
CTRL + A | Displays the Help menu. | |
CTRL | + E | Jumps to Active Alarm menu. |
CTRL + G | Jumps to Shelf Status screen. | |
CTRL + R | Refreshes the screen. | |
|
|
|
(a) Legacy management units require the use of control keys instead of arrow keys.
Most VT100 emulation programs support a print screen option. For
22 | August 30, 2002 | D3LX CO and RMT Modules |