SPACEBAR , ←

Local Configuration

LTPS-UM-8013-03

 

 

VIEWING LOOPBACK STATUS AND

PERFORMING LOOPBACK COMMANDS

Use this procedure to view loopbacks and send loopback commands for a specific D3LX system.

1From the Main menu, select 6. System Maintenance.

2From the System Maintenance menu, select

4. Loopback Status Commands.

6.System Maintenance

4.Loopback Status Commands

1.High/Low Speed Loopback Status Commands

3From the Loopback Status/Commands menu, select 1. High/Low Speed Loopback Status/Commands (as shown in Figure 16) to view the status of current loopbacks and to enable new loopback tests for low-speed modules and their associated components.

4 Use , → , ↓ , and ↑ to select the group and slot to display, populate each data field according to your requirements, then assign the selections by pressing ENTER .

Figure 16. Loopback Status and Commands

28

August 30, 2002

D3LX CO and RMT Modules