Adiministrative Tasks
2-4 Start-up and Shutdown 601354 Rev A
The volserv command starts VolServ in the
multiuser mode. Client interface commands are
accepted after initialization completes. Commands
received prior to initialization completion are failed
and the error, ERR_SOFTWARE_NOT_READY, is
returned.
The volserv -s command starts VolServ in the
single-user mode. Only commands from the vswin
module are accepted. Client interface commands are
refused and the error,
ERR_NOT_ACCEPTING_COMMANDS, is returned.
Successful VolServ software start-up is indicated by
the display of the Volume Server SysLog Console.
The Volume Server SysLog Console displays on the location
specified in the console.config file. The console.config
file also specifies which logging levels are displayed on the
Volume Server Syslog Console.
hostname% volserv -s