INSTALLATION SUMMARY:

1.) Install PYRO Card and install 1394 bus controller drivers from the Windows CD.

2.) Install camcorder drivers from PYRO CD #1

3.) Apply external power to your camcorder

4.) Turn Camcorder on to VCR/VTR mode

5.) Plug camcorder into PYRO card. Camcorder is recognized as new device.

6.) Check Device Manager to determine which camcorder driver you are using.

7.) Install Video Studio 4, Quick Time and Microsoft NetShow Services.

8.) Select Camcorder Driver(s) you are using.

9.) Re-Boot

10.) Start Video Studio application

11.) Select “G” global properties

12.) Select “Ulead Direct Show Capture Plug-in”

13.) Select Device control and choose either TI 1394 Device Control or MS1394 (be sure to match the camcorder driver you are using).

You are now ready to start your first video project.

19

Page 19
Image 19
ADS Technologies None manual You are now ready to start your first video project