NetVanta 4300/4400 Series

Unit Installation

 

 

Using a USB Cellular Modem with the NetVanta USB WWAN NIM

The NetVanta USB WWAN NIM contains a Type A USB connector that supports a variety of third-party USB cellular modems.

Visit the NetVanta USB WWAN NIM product page at www.adtran.com for a list of supported third-party USB cellular modems.

Always remove power from the unit prior to removing or installing a module.

• Improper installation may result in damage to the modules.

 

Instructions for Installing a USB Cellular Modem in the USB WWAN NIM

Step

Action

1Remove power from the base unit.

2Remove the cover from the base unit’s option slot.

3Slide the USB WWAN NIM into the option slot until the module is firmly seated against the chassis.

4Secure the pins at both edges of the module.

5Restore power to the base unit.

6Refer to the quick start guide that shipped with the NetVanta USB WWAN NIM for instructions on obtaining a cellular account and activating your USB cellular modem.

An optional USB Locking Mechanism is available from ADTRAN (P/N 1700643G1) to lock the USB to the NetVanta USB WWAN NIM.

61200890E2-34R

Copyright © 2013 ADTRAN, Inc.

53

Page 53
Image 53
ADTRAN 1202890E1 manual Using a USB Cellular Modem with the NetVanta USB Wwan NIM, Step Action