NetVanta 4300/4400 Series

 

Unit Installation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 20. Wall Mounting the Unit

Supplying Power to the Unit

As shipped, each NetVanta 4000 is set to factory default conditions. After installing the base unit and any option modules, the NetVanta 4000 is ready for power up. To power the unit, ensure that the unit is properly connected to an appropriate power source (as outlined in the sections below).

NetVanta 4305 (AC) and NetVanta 4430

The AC-powered NetVanta 4305 and NetVanta 4430 units come equipped with an auto-sensing 100 to 250 VAC, 50/60 Hz power supply. All appropriate power cords are included in the shipment of the units. To power these units, connect the power cable to an appropriately grounded power source.

Install unit in accordance with Article 400 and 364.8 of NEC NFPA 70.

• Maximum recommended ambient operating temperature is 50°C.

Previous versions of the NetVanta 4430 were equipped with either a 120 VAC, 50/60 Hz (1700630G1#120) or 240 VAC, 50/60 Hz (1700630G1#240) power supply. Plugging these units into an incompatible power source will damage the unit. Refer to the label on the unit before connecting the unit to the power source.

61200890E2-34R

Copyright © 2013 ADTRAN, Inc.

49

Page 49
Image 49
ADTRAN 1202890E1 manual Supplying Power to the Unit, NetVanta 4305 AC and NetVanta