ADTRAN 1202890E1 manual NetVanta 4430 Rear Panel Design, CompactFlash

Physical Descriptions NetVanta 4300/4400 Series

CompactFlash

The NetVanta 4430 front panel contains a CompactFlash® slot for nonvolatile configuration storage and compressed code storage. ADTRAN supports only ADTRAN-provided CompactFlash (16 MB to 1 GB) (refer to the list of part numbers on the front cover). Refer to Installing a CompactFlash Card on page 57.

NetVanta 4430 Rear Panel Design

Figure 5 shows the NetVanta 4430 rear panel. The chassis are shown with the T1/FT1 + DSX-1 NIM installed.

GIG 0/1					100-250VAC
					50/60Hz
		WAN-T1 DSX-1	DBU	WAN-T1 DSX-1	DBU
GIG 0/2	WIDE MODULE	SLOT 2 NET/DBU		SLOT 1 NET/DBU

Figure 5. NetVanta 4430 Rear Panel Layout

NetVanta 4430 Rear Panel Interfaces and LEDs

10/100/1000Base-T Gigabit Ethernet Interfaces/SFP Slots

The Gigabit Ethernet ports (GIG 0/1, GIG 0/2) provide two fixed RJ-45 connectors with LEDs and two SFP slots for fiber connectivity. (Use either the RJ-45 connectors or the SFP slots. The fiber slots have precedence.) The RJ-45 LEDs reflect the activity on either the RJ-45 port or the SFP slot. The yellow activity LED flashes when data traffic is being sent or received. The green link LED is on when the router has a good connection to the LAN. See Table A-1 on page 59 for the Ethernet port pinouts. The Ethernet port provides the following:

•10Base-T, 100Base-T, or 1000Base-T via RJ-45

•100Base-X or 1000Base-X via SFP

•Auto-negotiation

•CSMA/CD

•IEEE 802.3 compatibility

•Auto MDIX

NET/DBU and Wide Module Option Slots

The WIDE MODULE slot accepts the Octal T1/E1 Wide Module. The SLOT 2 NET/DBU and SLOT 1 NET/DBU option slots support various NIM plug-in modules. These option modules are described in the section Option Modules on page 24.

Power Supply

The NetVanta 4430 has a worldwide auto-ranging AC power supply with an IEC connector. The appropriate three-prong cable is included in the shipment. Please refer to Supplying Power to the Unit on page 49 for connection details.

Previous versions of the NetVanta 4430 were equipped with either a 120 VAC, 50/60 Hz (1700630G1#120) or 240 VAC, 50/60 Hz (1700630G1#240) power supply. Plugging these units into an incompatible power source will damage the unit. Refer to the label on the unit before connecting the unit to the power source.

22 Copyright © 2013 ADTRAN, Inc. 61200890E2-34R