Option Modules

NetVanta 4300/4400 Series

 

 

NetVanta Dual T1 NIM (P/N 1200872L1/1202872L1)

The NetVanta Dual T1 NIM (see Figure 10) provides two WAN T1 interfaces for the NetVanta 4300/4400 Series. The module provides up to 2.048 Mbps on each network interface. See Table A-6 on page 61 for the pinouts. See Table A-14 on page 64 for the DBU connector pinouts. An optional DIM is required for dial backup applications.

WAN T1/1 WAN T1/2 DBU

Figure 10. NetVanta Dual T1 NIM

Features and Specifications

Operating Modes

Frame Relay, Multilink Frame Relay

PPP, Multilink PPP

HDLC

T1 Interface

Supported Standards: AT&T TR 62411, AT&T TR 65016, ANSI T1.403, Bellcore TR 194

Line Rate: 1.544 Mbps +75 bps

Line Code: AMI or B8ZS

Framing: D4 (SF) or ESF

FT1 Line Rate: DS0 channelized (multiples of 64 kbps)

Input Signal: 0 to -36 dB (DS1)

Line Build Out: 0, -7.5, -15, -22.5 dB (long), 0 to 655 ft (short)

DS0 Assignment: Programmable

Connector: RJ-48C

Clock Source

Network

Internal

Through

Diagnostics

Test Pattern Generation and Detection: QRSS, 511, 215 - 1, 220 - 1, all ones, all zeros

Network loopbacks (local and remote); responds to both inband and FDL loop codes

Alarm generation and detection

Network performance data (15 minutes and 24 hours)

Compliance

EMC - see Electromagnetic Compatibility (EMC) Table on page 6.

ACTA/FCC Part 68

IC CS-03

UL/CUL 60950-1

Environmental

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, noncondensing

Physical

Dimensions: 2.75-inch W x 4.25-inch D

The 1200872L1 Dual T1 module supports the analog modem (1200864L1), ISDN BRI (1200865L1), and ISDN S/T (1200875L1) DIMs for dial backup applications. The 1202872L1 Dual T1 module supports only the analog modem (1200864L1) DIM for dial backup applications.

32

Copyright © 2013 ADTRAN, Inc.

61200890E2-34R

Page 32
Image 32
ADTRAN 1202890E1 manual NetVanta Dual T1 NIM P/N 1200872L1/1202872L1, T1 Interface