ADTRAN XRT, 3360.9VU01, 1200153L2, 1200153L1 Installing Windows 95 Dial-Up Networking, About, Exit

Chapter 2. Installation

About

Displays version information.

Exit

Exits the Tray Tool.

Installing Windows 95 Dial-Up Networking

Dial-Up Networking for Windows 95 is most commonly used for connections to Internet Service Providers or other networks.

Use the following procedure to install Windows 95 Dial-Up Networking:

1.From Start, choose Settings, then Control Panel, then double click Add/Remove Programs.

2.Double click on the Communications option under the Windows Setup tab.

3.If not already selected, check Dial-Up Networking.

4.Click OK to select these changes.

5.Click OK to begin installation of Dial-Up Networking.

6.Restart the computer.

7.Once Windows boots, from Start, choose Settings, then Control Panel, then double click Network.

8.From the Network list, verify the following components are installed: Dial-Up Adapter and TCP/IP for Dial-Up Adapter. If you intend to use your Express XR/XRT for Internet access, these should be the only components needed. Verify the software setup from your Internet Service Provider or network administrator to ensure the networking components are set up properly.

9.Click OK once you have verified these components are installed.

10.To create a Dial-Up Networking connection select My Computer, then choose Dial-Up Networking. The first time Dial-Up Networking has been used, the Welcome to Dial- Up Networking menu appears.

11.Click NEXT.

12.Enter the name for this connection and select the ADTRAN Express XR or XRT from the modem list. You may config- ure DTE speed and server information by choosing the Configure button next to the selected modem.

13.Click NEXT.

22 Express XR/XRT Quick Start Guide 61200.153L1-13