Appendix D. Loop Status Messages
Appendix D
Loop Status Messages
This appendix lists the status line messages and their definitions. Messages shown entirely in capital letters are generated by the ISDN network. Messages with lower case letters are generated by the Express XR/XRT.
AutoSpid X
The SPID is being attempted by the AutoSpid determination. X starts at 0 and counts up for each SPID tried.
Call Connect B1
Bearer channel 1 is connected and is active.
Call Connect B2
Bearer channel 2 is connected and is active.
Call Connect B1/B2
Bearer channels 1 and 2 are active.
Disconnecting
The current phone call is being disconnected (hung up).
Getting TEI #1
The Express XR/XRT is receiving its first TEI from the network.
Getting TEI #2
The Express XR/XRT is receiving its second TEI from the network.
Link Down
The network interface is not in sync.
Network Loopback
The Express XR/XRT has been commanded to perform an ISDN loopback toward the network.
Express XR/XRT Quick Start Guide | 75 |
