61200.153L1-1 Express XR/XRT Quick Start Guide 67
Appendix C. Status Buffer Messages
BPS mismatch
Bonding negotiation found a bit rate mismatch.
Break to AT cmd
User issued a break-in request.
Break ignored
User issued an extra break-in request.
BUSY
The called number is busy.
B-X disconnected
B-channel disconnected. X can be 1 or 2 representing the appro-
priate B-channel.
CallID 1 in use
The Express XR/XRT tried to place a call using SPID 1 when
SPID 1 was already in use.
CallID 2 in use
The Express XR tried to place a call using SPID 2 when SPID 2
was already in use.
Call lost
Held call could not be retrieved.
Call not ringing
User executed an answer command (ATA) but there was not a
call present.
CALL_REJECTED
The call has been rejected by the ISDN network.
Can't go online
Express XR/XRT cannot go back on line. Unknown AT com-
mand user issued an unknown AT command.
CHAN_DOES_NOT_EXIST
The user asked for a bearer channel that is not present.
CHAN_NOT_IMPLEMENTED
The network or far end does not support the bearer capability
requested.