ADTRAN XRT, 3360.9VU01 Profile Configurations, Factory Internet 64k, Factory Internet 128k

Chapter 4. Application Configuration

The Express XR/XRT can be reset to the factory default settings by setting switch 2 to the Off (Up) position. See the section Switch Settings in the chapter Installation for more information.

PROFILE CONFIGURATIONS

Some common configurations are preset in the Express XR/XRT software as profiles. Most Internet service providers supporting ISDN also support PPP protocol. If connecting to an Internet service provider using one B-channel, select Factory: Internet 64k which sets the protocol to PPP. If arrangements have been made with the Internet service provider to use two B-channels, select Factory: Internet 128k, which uses multilink PPP proto- col.

Loading a factory profile has no effect on any SPID(s), ISDN Phone Number(s), or Switch Type settings already configured. The settings that are altered when applying a profile are shown as follows:

Factory: Internet 64k
Call Type	Data 64kbps
Auto Answer	Enabled
DTR Options	Ignore DTR
Flow Control	Hardware
Protocol Type	PPP
PPP Mode	Single-link PPP
Factory: Internet 128k
Call Type	Data 64kbps
Auto Answer	Enabled
DTR Options	Ignore DTR
Flow Control	Hardware
Protocol Type	PPP
PPP Mode	Multilink PPP
Factory: Remote Access 64k
Call Type	Data 64kbps
Auto Answer	Enabled
DTR Option	Ignore DTR
Flow Control	Hardware
Protocol Type	CCITT V.120

40 Express XR/XRT Quick Start Guide 61200.153L1-13