Quick Startup Guide
61200176L2-1 Express 4100/4110 User Manual Quick Start-5
22. All the parameters for this Connection List profile are complete. To
save them, press the left arrow to get to the top (main) menu; when
prompted Save Connection List changes? enter y.
23. Set up the computer workstation’s IP and IPX parameters as
instructed by the network administrator. The Expr ess 4100/4110’s IP
address should be the computer’s default gateway.
When the computer which is attached to the local LAN attempts to access
a host on the access server, the Express 4100/4110 will dial the number
provided in the Connection List profile. The Express 4100/4110 will pro-
vide one of two B-channels based on traffic dema nd and POTS port usage
(Express XLT model only). If no packet traffic is transmitted or received
for the specified number of seconds, the Express 4100/4110 will discon-
nect the link until a computer on the local LAN again attempts to access a
host on the access server.
If Novell’s IPX protocol is being used, the link must be dialed first in the
Dial menu to obtain the server an d r oute information needed by the co m-
puter to boot up. Advanced users can use the Expr ess 4 100 /4 110’s Probe
feature to periodically dial the access server to obtain the route and
server information, thereby removing the need to manually dial the first
time.