Chapter 3. Terminal Menu Operation and Structure
3-46 Express 4100/4110 User Manual 61200176L2-1
Connection List/Probe
The Pro be feature on the Express 410 0/4110 is mainly used for allowing a
network to have multiple vi rtual netw ork conn ec tions to many destina-
tions usin g the single ISD N link. The Express 4100/4110 can periodically
obtain routing information from various lo cations and retain this in the
routing tables, thereby permitting the LAN connection to be aware of the
networks at this location. Probe helps keep route tables updated. When a
service or network connection is required, the Express 4100/4110 can
demand dial that location. This can be beneficial for remote IPX worksta-
tions that cannot boot up properly without knowing the IPX services that
would be in the Express 4100/4110’s SAP table.
Probe/Active
Write security: 3; Read security: 5
When set to Yes, the Express 4100/4110 will periodically dial this profiles
dial-out number to get ro uting and service table updates. The default is
No.
Probe/Interval
Write security: 3; Read security: 5
This is the time the Express 410 0/4110 waits between pr obes. The value is
in minutes and ranges from 1 to 240. The default is 15 minutes.
Probe/Update Window
Write security: 3; Read security: 5
This is the time the Express 4100/4110 stays connected during a probe.
Normally route and service tables are exchanged immediately after con-
nection. However, some routers could wait until their regular RIP or SAP
time period has been reach ed befor e they advertise their routes or services
to the Express 4100/4110. The value is in seconds and ranges from 5 to
180. The default is 5 seconds and assumes that a routing update is
received upon connection.