8.13 Save and Exit Setup
Figure 8-10: Save and exit setup screen
After you have made changes in the BIOS setup, press "Esc" to return to the main menu. Move the cursor to "Save and Exit Setup", or press "F10" and then press "Y", to change the CMOS Setup. If you did not change anything, press "Esc" again or move the cursor to "Exit Without Saving" and press "Y" to retain the setup settings. The following message will appear at the center of the screen to allow you to save data to CMOS and exit the setup utility:
SAVE to CMOS and EXIT (Y/N)?
8.14 Exit Without Saving
If you select this feature, the following message will appear at the center of the screen to allow you to exit the setup utility without saving CMOS modifications:
Quit Without Saving (Y/N) ?
Chapter 8 Award BIOS Setup | 83 |
