Advantech PPC-S123 manual Place CPU push cover over CPU

2.Insert the CPU in the correct orientation and gently slide the CPU in. It should insert easily. Make sure the pin of the CPU corresponds with the hole of socket. Do not use excessive force.

3 Place the metal CPU push cover on the top of the CPU as shown in Figure 3-4.

Figure 3-4: Place CPU push cover over CPU

4.Insert a flat-headed screwdriver into the side hole of the CPU at an upward perpendicular angle to the CPU, as shown in Figure 3-5. Make sure the slightly bend screwdriver head is pointing outward.

Chapter 3 Hardware and Peripheral Installation 21