12Automatic programmes
SYMBOL
FUNCTION
TIME OF DAY
DESCRIPTION
Shows the time. To set, change or check the time. Refer to
"Setting and changing the time of day".
Setting the clock
1.Activate the appliance and set an oven function and temperature (not necessary for Minute minder and Time of day).
2.Touch 
again and again until the display shows the necessary clock function and the related symbol, for example Minute minder 
.
3. Touch or to set the necessary time.
When the set time ends, an acoustic signal sounds for 2 minutes. “00.00” goes on in the display and the related function indicator flashes. The appliance deactivates automatical- ly. Touch a sensor field to stop the acoustic signal.
General instruction:
• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5
seconds, touch |
| or | to set the time. |
|
•If you set the time, the symbol continues to flash for approximately 5 seconds. After these 5 seconds, the symbol comes on. The time starts to count down for Minute mind- er. For Duration and End the time starts to count down after the function starts.
•If you want to delay the start of the cooking time use End function 
.
•If you want to end cooking earlier (before end of clock functions) use 
.
AUTOMATIC PROGRAMMES
WARNING!
Refer to "Safety information" chapter.
Automatic Programmes
For an automatic programme, use the recipes from section "Automatic programmes".
Setting a programme
1.Activate the appliance.
2.Use 
to access the automatic programmes menu.
3.Use 
or 
to set an automatic programme (P1 to P12).
–The symbol for the function comes on in the display.
–The cooking time and 
come on in the display.
– | Touch the clock control . Then, touch the |
| or control to set the cooking time. | |
| ||||
– | The oven activates automatically after approximately 5 seconds. | |||
When set time ends, an acoustic signal sounds for 2 minutes. | flashes. The oven stops | |||
automatically. Touch a control to stop the acoustic signal. |
| |||
