AEG KB7100000 user manual Care and cleaning, Risk of fire, Oven lamp, Service centre

6Safety information

Care and cleaning

•Before maintenance, switch off the appliance and disconnect the appliance from the power supply.

•Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break.

•Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.

•Regular cleaning prevents the surface material from deteriorating

•Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains that can be permanent.

•For your personal safety and the safety of your property, only clean the appliance with water and a soap. Do not use flammable products or products that can cause corrosion.

•Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects, abrasive cleaning agents, abrasive sponges and stain removers

•If you use an oven spray, follow the instructions from the manufacturer.

•Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resist- ant surface of the inner glass can break and shatter.

•When the door glass panels are damaged they become weak and can break. You must replace them. Contact the service centre.

•Be careful when you remove the door from the appliance. The door is heavy!

•Do not clean catalytic enamel (if applicable).

Risk of fire

•Open the door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. There is the risk of fire.

•Do not let sparks or open flames come near the appliance when you open the door.

•Do not put flammable products or items that are wet with flammable products, and/or fusible objects (made of plastic or aluminium) in, near or on the appliance.

Oven lamp

•Bulb lamps used in this appliance are special lamps selected for household appliances use only. They cannot be used for the full or partial illumination of a household room.

•If it becomes necessary to replace the lamp use one of the same power and specifical- ly designed for household appliances only.

•Disconnect the appliance from the power supply before the replacement of the oven lamp. There is the risk of electrical shock.

Service centre

•Only an approved engineer can repair or work on the appliance. Contact an approved service centre.

•Use only original spare parts.

Disposal of the appliance

• To prevent the risk of physical injury or damage